ploughmyfield.com

Thanks to Roy for sending me a couple of pictures of his TED-20 looking great in the snow.

Tags: SNOW, TED-20.

Since Roys last post,

He and Ted, another Friend, have been busy. Ted has been working on the cylinder head, which looks so different from a TEF cylinder head. Ted has bought a tool to re-cut the valve seats for the new inlet valves that Ted managed to get hold of for Roy. He has then re ground, by hand I think, the valved into the seats.

Roy popped round with the head to say happy new year and I had a chance to take a couple of pics.

Roy then got busy adding the valve springs.

Roy’s tractor is located some distance away at his Daughters house so he doesn’t get chance to work on it all the time. Instead he unbolts what he can and brings it home to his garage and does what is needed on the parts then returns it. In this case it’s the radiator. Now Roy has the head back together it’s off to his Daughters to work in his shed for a couple of days. Hopefully by the end he should have a working tractor.

Was down with the Tractor late Thurs to Friday finished the painting, apart from under the bonnet.  Reassembled the head but no time to set up the carb and ignition to run smoothly will be down again near the end of the month.

Roy

Tags: Cylinder Head, Roy, TED-20.

13th December
Hi Tim,
The photo’s are from the last few days as you can see the axle pin is fixed firm to the cradle but does have some wear on the pin and the bush is not to bad. I tried a heavy hammer with a large bolt in the pin. I tried to knock it out with no luck so decided to leave as is.

24th November
Hi Tim, ordered parts from Silver Fox yesterday arrived today with 10% discount I quoted offer EBAY10. I prefer to go direct than eBay. NEW PARTS DO LOOK GOOD.

20th November
Valves, Version 4 on the sheet.c
I am having great difficulty getting the inlet valves MM 31.400 approx across the tops still waiting to hear from one of the dealers he promised to get back to me on Monday my present valves have a wear ridge.

Tags: Roy, TED-20, Valve.