Posts Tagged ‘Tool Box’

* Roy’s Toolbox

Posted on November 24th, 2011 by ploughmyfield. Filed under General.


From the 2011 Newark Tractor show Roy bought a toolbox for his TED-20. It should be mounted on the left side of the battery carrier frame just in front of the dashboard.

Rather than looking for an original toolbox Roy was happy to purchase a replica. He chose the offering from Patrick, wwww.Fergiland.com and got a great show deal. Tip: Not only will you save Postage & Packaging buy buying at a show (offsetting the entry price) getting your parts from a show also offers you the opportunity to look at and feel the items and check it’s quality and suitability. You can’t do that when buying over the internet. There is also the probability that the seller may have an atractive show offer available making it cheaper than buying normally.

All the reproduction toolboxes Roy and I saw at the show have the lid hinge running the full length of the box, unlike the original toolboxes. Another feature of the original box saw the catch was riveted on as opposed to welded with the modern box. Oh yet and the modern one is painted red.

“The bolt holes on the original where off to othe right side. This box has then centrally positioned. When fitting if it fouls the dashboead I’ll drill some more holes offsett.” Roy commented

New Tool Box

So Roy also bought two copper rivets and has added them to his new toolbox to make it look a bit more authentic.

ToolBox Rivets

And he’s made a great job of painting it grey

Grey Toolbox

Nice job Roy, I wait for the photo from Roy of the toolbox fitted to his tractor.

Tags: , , , , .



* News Update

Posted on September 7th, 2011 by ploughmyfield. Filed under News.


Toolbox fitted

I Finally got the tool box fitted to the radius arm of my TEF-20 tonight. below picture showing the before and after. I should have fitted the tool box to the left hand rear mudguard as my serial number dictated. It was only later in production that the tool box was fitted to the radius arm. Later FE-35’s also had their toolboxes fitted to the radius arm.
Tool Box Before

Before as it arrived.

Tool Box Fitted

Tool Box as fitted tonight.

9S-KE-20 Update

Its amazing how small a Ferguson implement shrinks down to once  you’ve taken it apart. Here is my S9-KE-20 all ready to go off to the shot blasters,.

S9-KE-20

 

 

Tags: , .



* Arrival of parts

Posted on June 23rd, 2011 by ploughmyfield. Filed under News.


Original Tool Box

I keep asking myself the question, “am I mad or stupid or am I doing the right thing?”  I bought not so long ago on eBay an original Ferguson tool box to go on my tractor.  A slight issue arose that, the tool box was still attached to the radius arms and offered as a complete item. I didn’t need the radius arms and arranged with the seller for him to post me the tool box and clips still attached for free and he could keep the arms.

Tool Box Still Attached

So now the toolbox has arrived and it looks Fabulous. It’s now going to take a lot of hard work to make it look nice and shiny.

Tool  Box Front

Tool Box Back

So now the question. Why am I going through all this when I could just buy a new, reproduction tool box that wouldn’t need much doing to it and would cost less? All I would have to do is  rub it down and paint is. Not remove the layers of old paint surface rust an grime, then prime, then paint.

To me the original one still has far more appeal. It was once on a tractor, it was made for the tractor. Some how it seems more right? does anyone else think like this?

New Tool Box
This picture shows the type of item that can be bought cheaper and new on eBay.

Chains

A big thank you to Matt for welding the chains for me. I have now completed a few original looking chain sets which attach to the top link. The idea dehind them was you never loos the pins that go trough the top link as the chains prevent them getting lost.

Not many of these seem to have survived I imagine they broke, ware out or got damaged. The pin and latch pin I got from Dunlop tractor parts (northern Ireland) who had a stand at the Newby Hall show I attanded a couple of weeks ago.

Transporter Box hooks

This section I’m hoping isn’t going to turn into a rant. The pin in the picture below which cost 30p from Dunlop Tractor spares. I bought 10 as I thought they where such a bargain, Should be fitted to all Ferguson tractors. DON’T fit the pins with the round ends. Anyway, removing the pear shaped end it can be attached to the hooks on the transporter box (Link Box)

by using the pear shaped ends instead of the round ones you guanentee there will be no rotation and the end won’t fall out.

Transport Box Clip Up

Transport Box Clip Down

below you can see someone who was used the round ends on the hooks for there Transport Box

Transport Box Hook

Speculative Purchase

I bought this spring not really needing it. Do you know what it does?

Top Link Spring

Well it attaches a heavy implement to the tractor, just below the top link on the fixed pin. You also need to use the toplink to connect to the implenment at the same time.

In the Potato Planter instruction book it is listed as a balance spring in the parts list.

Balance Spring

To me it seems to aid the toplink sensing with heavy implements added, such as The potato planter.

Spring in place

I’ve seen it used on other implements aswell. It’s the kind of item that you would look forever to find when you need one. It’s going to be hanging in the garage until I need it.

I did then spot a more complete one once I’d bought this one.  But I think it’s just a metal bracket at the end that’s missing from the one I bought and it shouldn’t be that difficult to fabricate.


Item then found on eBay in a more complete condition!

Hi Tim,
You are correct, the spring does assist sensing. It is best used on
very light draft requirement implements such as the weeder and
steerage hoe. It pulls the top link into the compression spring
(effectivly weakening said spring) enabling the implement to follow
ground contours even more acurately. A heavey draft implement such as
the plough does not require such fine control and indeed would have
impaired performance if it were deployed.
The assister spring enhances and fine tunes the level of
‘fingertip control’ within the ‘Ferguson System’.
It has often been misunderstood and discarded as a nuisance to fit.
Regards
Tim Webb.

Implements the spring was fitted to…..

  • P-PE-B20, PPE20, Potato Planter, Non chitted
  • M-KE-A21, Weeder
  • ID-KE-20, D-KE-20, IB-KE-20, B-KE-20, Steerage hoe Rigid & Independent gang
  • G-BE-20, G-DE-20, Disc harrow, offset

Tags: , , , , .



Current Hot Topics

Recent Pictures

Hover over to view images. Click to show bigger.

Pages

Ploughing:

Plough - Ferguson
Plough - Match

Tractors:

TEF-20
FE35

Implements:

10-AE-28, 2 Furrow Plough
A-LE-A20 Cordwood Saw
5A-EE-B20 Rear Mounted Mower
C-UE-21 Crane
T-JE-A20 Transport Box
S9-KE-20, Spring Tine Cultivator - to be added
K-JA-30, 2 TON Trailer

Accessories:

Ferguson Spanner
A-TE-61 Hinged Seat and Feetrests
A-TE-66 Belt Pulley
A-TE-70 Tractor Jack
A-TE-78 Dual Wheel Kit
A-TE-87 Lighting Kit, Full
A-TE-A90 Pick Up Hitch - to be added
Ferguson Accessory List

Events:

Newark Tractor Show 2010
Newark Tractor Show 2007
Donegal Holiday 2008
Beamish, Steam Day 2007
FoFH Day 2004

Dealers:

Samuel Wilson & Son, Ltd (Sheffield)
John I. Fearn (Agricultural) Ltd

Info:

Technical
Downloads
Links
My YouTube Video's

Old Ploughmyfield Web Pages:

Previous Index 7
Previous Index 6
Previous Index 5
Previous Index 4
Previous Index 3
Previous Index 2
Previous Index 1

Old Pictures:

Initial Pictures
First Pictures
Second Pictures
Third Pictures
Fourth Pictures
Fifth Pictures