Posts Tagged ‘A-TE-93’

* Tractormeter 2

Posted on July 14th, 2015 by ploughmyfield. Filed under General.


This article is a follow up to the first part:
http://www.ploughmyfield.com/2015/06/28/tractormeter/

 

Hi Tim
I was surprised and a bit excited to see my photo’s  and email on your site so I thought I had better finish the story. As I understood my generator is larger in diameter than the later ones and this was the major cause of my  mounting problems.   I had to remove the spring mount and make a spring that worked outside the arm, also had to machine a flat on the body of the arm and reduce the diameter  of  the removable section of the arm if that all makes sense. The end result gives me 1mm clearance. Changing the length of the mounting bracket does not alter the clearance.

A large number of  grey fergie’s in Australia have upswept exhausts owing to fire requirements and in fact a lot were fitted with wire gauze spark arrestors, my tractor with the upswept forces the cable to be re-routed and will require different support brackets to be fabricated. Enclosed are some photo’s to show were I have had to mount the cable and others to show the ignition key and points adjusting tool that came with the tractor.  Your images and instruction manual copies have been invaluable and I must point  out that the carden arm as supplied by Agriline is set up for a TEA not a TEF .

A brief history of my tractor is that it was delivered by a local dealer in June 1950 to an address very close to where it is now housed. The Tractor Instruction Book and original promotional pamphlet with the hand written price of 599 pound 17 shillings and 6 pence Which included a tool bar and delivery on block and signed by the salesman came with it. The epicyclic gearbox must have been fitted at a later stage with the cost being in access of 400 pound back then. The motor was seized and the tractor in poor condition when I got it.  A photo showing the gearbox is also enclosed and I was fortunate enough to collect a Ferguson Rotary Hoe today, again  in very poor condition, that when repaired will complete the tractor.

This tractor was the first I collected and I now have 22 with 6 being grey fergies and 4 other different  Fergie models

Regards

Graham

 

Graham, Thanks for taking the time to write and I’m dead jealous of that Ferguson Reduction Gearbox!
DSC_0016
DSC_0017
DSC_0018
DSC_0019
DSC_0021

Tags: , .



* A-TE-93 Information still needed

Posted on June 28th, 2015 by ploughmyfield. Filed under General.


I’m still looking for information and dimensions for some of the A-TE-F93 parts.

The clips are for the TEF-20, the one on the left is under the dashboard, the one on the right connects at the end of the ait cleaner.

Diameter of the hole on the right is 1/4″

CLIPS

A-TE-F93_5_CLIP

I think the dimension X is 4″

RINGS

A-TE-F93_OTHER

Once I’ve got the dimensions for the spring I will still need to get one made!

SPRINGS

A-TE-F93_10_spring

Tags: , , , .



Current Hot Topics

Recent Pictures

Hover over to view images. Click to show bigger.

Pages

Ploughing:

Plough - Ferguson
Plough - Match

Tractors:

TEF-20
FE35

Implements:

10-AE-28, 2 Furrow Plough
A-LE-A20 Cordwood Saw
5A-EE-B20 Rear Mounted Mower
C-UE-21 Crane
T-JE-A20 Transport Box
S9-KE-20, Spring Tine Cultivator - to be added
K-JA-30, 2 TON Trailer

Accessories:

Ferguson Spanner
A-TE-61 Hinged Seat and Feetrests
A-TE-66 Belt Pulley
A-TE-70 Tractor Jack
A-TE-78 Dual Wheel Kit
A-TE-87 Lighting Kit, Full
A-TE-A90 Pick Up Hitch - to be added
Ferguson Accessory List

Events:

Newark Tractor Show 2010
Newark Tractor Show 2007
Donegal Holiday 2008
Beamish, Steam Day 2007
FoFH Day 2004

Dealers:

Samuel Wilson & Son, Ltd (Sheffield)
John I. Fearn (Agricultural) Ltd

Info:

Technical
Downloads
Links
My YouTube Video's

Old Ploughmyfield Web Pages:

Previous Index 7
Previous Index 6
Previous Index 5
Previous Index 4
Previous Index 3
Previous Index 2
Previous Index 1

Old Pictures:

Initial Pictures
First Pictures
Second Pictures
Third Pictures
Fourth Pictures
Fifth Pictures