Ferguson Tractor TE20 Number Plate Brackets - Repro
Right Hand Wing Mounted Numberplate Holder (UK)
Currently Unavailable
Background
Having never been able to get hold of an original wing mounted number
plate bracket I have made my own. I have reproduced the Ferguson TE-20
Rear Number Plate Bracket that attaches to the rear right hand mudguard.
I have had them professionally laser cut and folded. All the holes are
present if you wish to add the rear light and cross over switch(these
are not supplied).I've put a lot of effort into researching this item.
It is my interpretation on the side mounted number plate holder. This
item was originally supplied as part of the Lucas lighting set for the
Ferguson tractor. The item is bolted to the wing of your TE20 tractor.
You can clearly see the hole in the top for the cross over switch and
in the bottom for the rear light.
Features
-
Laser cut for accuracy
-
2 part construction
-
Complete with grey undercoat
-
Hole for rear/number plate light
-
Hole for cross over switch
-
Hole for trailer socket connector
Included
If you buy this item you will receive two Steel plates which bolt together
then bolt to the mudguard. You will need to supply the bolts. The item
will be painted with a grey undercoat.
Cost
The cost for 1 Right Hand (UK) x Wing mounted numberplate holder is £40
Postage
£10 Postage for the UK is Parcel Post Recorded and you will have
to sign for the item when it arrives.
I have posted to other countries so it you need postage to another country
please email me (
)
and I can find a price for delivery.
Total £50
How to Buy
option 1. use paypal.
Currently Unavailable
Left Hand Wing Mounted Numberplate Holder (Europe)
Background
I had an enquiry from a european customer who wanted a numberplate for
his tractor. Driving on the right hand side of the road the law for the
country stated that the numberplate must be on the left side. I have had
a sample batch made to see how sales go. They are made to the same high
standard as the original right hand numberplate brackets.
Features
-
Laser cut for accuracy
-
2 part construction
-
Complete with grey undercoat
-
Hole for rear/number plate light
-
Hole for cross over switch
-
Hole for trailer socket connector
Included
If you buy this item you will receive two Steel plates which bolt together then bolt to the mudguard. You will need to supply the bolts. The item will be painted with a grey undercoat.
Cost
The cost of 1 Left Hand (Europe) x Wing mounted numberplate holder is £40
How To Buy + Postage
Please contact me at the below email address and I will find the postage
cost for your country.
please email me ()
and I can find a price for delivery.
Total £40 + (Postage)
Plough Lamp Bracket
Background
After looking at the design of the number plate holder I noticed there was a bracket also sitting on the top of the wing. The cross over switch on the number plate holder operates the tail light or the plough lamp. The plough lamp sits on the bracket. So I made the plough lamp bracket as well. It is folded from a single piece of steel.
Features
-
Laser cut one piece for accuracy
-
Complete with grey undercoat
-
Holes for mounting to the wing
-
Single part construction
Cost £13
Package and Postage Mainland UK using standard parcel post £2
Total £15
How to Buy
option 1. (if you have a paypal account)
option 2. (if you do not have a paypal account)
| Please email me for my address |
|
for cheques |
Images
find out more about the lucas lighting kit from the Lighting Page