ploughmyfield.com

Hi all,  took the pump out today very dirty,had difficulty removing the top casing   used a block and tackle  to shift it, luckily Jim called  so gave me a hand very heavy could not  remove part of the lifting arms, the top was catching as we tried to lift off ,we had to get  them down a little way this was achieved     with the jack and a large block of  wood  to hit it with, went down just enough now the lid is off  piston ok control valve ok it is the arms, reasemble and try the hydraulic lift tommorow.  plus more down pressure  may get them moving.

 

Regards Roy.,