* Nearly
Posted on November 1st, 2008 by ploughmyfield. Filed under TE-D20.
Hello all, very near now to firing up, the earth battery lead as supplied was just slightly short. So I made up a metal strap as photo and bolted both together behind the metal panel,
The thermostat housing has some corrosion where the thermostat screes in and seats. Will try a washer as photo,
The offside picture shows the exhaust on plus petrol pipe
The dash photo shows the ign light I put this on what really is the wrong side but is nearer the ign switch, the proper hole on the other side has been sealed.
Still wanting a drain plug for the transmission but may try to start tomorrow. The tap now appears to be ok no petrol leaks.
Leave a Reply
Pages
- A Get in Touch Page
- Ferguson Tools
- FP218/20000/2/51
- MIL Loader Fitting
- Painting Parts Process
- Ploughing
- Spill Timing TE-F20
- Suppliers
- TE-F20 Torque settings
Pages:
Plough - FergusonPlough - Match
Steam Day
FoFH Day
Newark 07
Donegal 08
Local History
Tractors
FE35
TE-F20
Implements
Plough
Cordwood Saw
Mower
Crane
Accessories
Lighting
Spanner
Pulley
Dual Wheels
Tractor Jack
Technical
Downloads
Links
Old Pages:
Previous Index 7
Previous Index 6
Previous Index 5
Previous Index 4
Previous Index 3
Previous Index 2
Previous Index 1
Pictures:
Initial Pictures
First Pictures
Second Pictures
Third Pictures
Fourth Pictures
Fifth Pictures



